Full Correction Detail

  • 1. PRE-WASH STAGE 1

Gtechniq W5 citrus all purpose cleaner applied to lower half of vehicle; to soften and help remove road grime and bug splatter.

  • 2. PRE-WASH STAGE 2

Gtechniq W4 citrus foam applied via foam lance to further aid the breakdown of remaining road grime and dirt.

  • 3. WHEELS WASHED

 

Using separate buckets, the wheels are washed using pH-neutral shampoo and pH-neutral brake dust               removers and includes wheel arches (wheels are turned full and opposite locks), brake calipers and the inside of the alloys with metal-free, 100% lambswool tools and soft-bristle brushes

  • 4. PH NEUTRAL SAFE WASH

 

Washed using Gtechniq G-wash, The Two Bucket Method with Grit Guards, and a Gtechniq Microfibre Wash     Mitt. 

  • 5. RINSE STAGE

 Vehicle rinsed using our De-ionised water filtration system 

  • 6. DRYING STAGE

 

The vehicle is then dried using warm filtered air to remove the risk of incurring scratches leaving a perfect finish, as well as removing all water from panel gaps 

  • 7. DECONTAMINATION STAGE

Claybar vehicle to remove further bonded contaminants, levelling the paintwork ready for the polishing stage

  • 8. CUTTING STAGE

Our cutting stage begins. This is to remove heavier defects dulling the appearance of your paintwork. due to the nature of this stage, considerable care it taken with regards to the paint. Thickness measurements are regularly taken and compared to previous reading to gauge the rate of clear coat removal. although we strive for 100% correction, some scratches may be deemed too deep to remove without compromising the paintwork.

  • ​9. POLISHING STAGE

Paintwork is then polished to remove any marring and machine induced scratches from the cutting stage. this can take multiple steps to perfect the paint and prepare it ready for our refinement stage.

 

  • 10. REFINING STAGE 

Paintwork is then refined to remove light marring to enhance gloss levels, whilst also addign excellent depth to the paintwork

 

  • 11. COATING STAGE

Paintwork is then cleaned using Gtechniq Panel wipe, to remove any polishing oils which may be hiding the true finsih of your paintwork, it is then coated with your choice of coating. (please note that all ceramic coating options require a minimum 12 hour cure time before being released).

    ESTIMATED TIME                                                            PRICES FROM

              5 Days                                                                              £945.00